Equipment Overview

The equipment is designed as a general flat plate work table, equipped with opening and closing mold oil pipe interface, opening and closing mold oil pipe interface is divided into 6 ways, the operation sequence can be set, the workbench rotation adopts gear liquid transmission design, the workbench rotation Angle is 0~90 degrees

two. technical parameter:

1. Device: PLC control

2. Operation: hydraulic system transmission, water distribution cooling and cooling test and cooling system (3 pouring machines are equipped with 1 hydraulic general pump system).

3. Mounting function: inclined casting, tilt positioning pouring, horizontal pouring.

4. Tubing interface is divided into 6 separate control, available die and open die cylinder connection.

5. Casting rotation speed and time are adjustable: the inclined casting Angle is 0-90 degrees.

6. The cooling time of the mold is adjustable. It can be cooled with 4 connections.

7. Workbench size: 900 * 700 * 100mm.

8. The rotating capacity of the bench is 1000 kg

9. Working oil pressure: 30-40kg / cm2.

10. Curing time: Adjustable.

11. Casting process time can be displayed.

12. The mold temperature can be displayed, and the mold heating is controlled by time control.

13. There is a mold water cooling pipe device system, one inlet and outlet of the upper and lower mold, (the water inlet and outlet of the equipment and the water pipe connected with the mold shall be provided by the customer).

14. Die heating device system (mold connecting line and heating rod are provided by the customer)

There are two sets of heating modes that can be heated in two stages (total power of 10,000 W).

15. Net weight of the equipment: about 1,500 k g

16. Machine specification: 1997 * 1543 * (equipment height 1480mm + three-section lamp 285mm=) 1765mm

Table height is 1078mm at 90 degrees